1
2
9
3
4
5
6
7
8
8
10
1. Line Out: For connection to an external amplifier
2. Input 1: For connection of optional equipment
3. Input 2: For connection of optional equipment
4. Input 3: For connection of optional equipment
5. Input 4: For connection of optional equipment
6. Input 5: For connection of optional equipment
7. Phono: For connection of a turntable with an MM phono cartridge
(Note: Ground Screw above inputs)
8. Speaker Left & Right: For connection to loudspeakers
– see additional instructions below.
9. Voltage Selector: Insure the voltage is (110-120v USA)
or (220-240v European) before connecting
10. AC Input: For connection of mains voltage. Make sure that the plug is correctly
inserted, and that the voltage corresponds to the text printed on the cabinet back panel.
Back panel introduction
-
6
-
Speaker Outputs Left and Right
To avoid damage to the a15.2, make sure it is
NOT
plugged into an AC outlet while
connecting up or disconnecting speaker wire to the speaker outputs. The a15.2
has one pair of speaker outputs on the back labeled
Speaker Left
and
Speaker
Right
. Using a suitable speaker wire, connect the right speaker to the Speaker
Right connectors and the left speaker to the Speaker Left. Pay careful attention to
match the positive (red) and negative (black) terminals on your speakers to the
positive (red) and negative (black) terminals on back of the a15.2.
Connecting to the Mains - Plugging In
Check that the Power Switch on front of the a15.2 is in the
off
position. Push the
plug (IEC line socket) of the power cable supplied with the a15.2 into the socket
(AC INPUT) on back of the unit. Make sure it is pressed in firmly. Plug the other
end of the power cable into an AC wall outlet.
Speakers
Speakers
Subwoofer
(Optional)
Slave amplifier
PO WE R
Turntable
DAB/FM Tuner
DVD Player
CD Player
VCR
Satelite Receiver
H D C D P L A Y E R
PO WER
09-12-36
PR OG RA M
RA ND OM
PR EV
NE XT
PL AY
/
PA US E
ST OP
OP EN
/
CL OS E
PO WE R
-
7
-
