Murrplastik P3B, Руководство по эксплуатации, Страница: 17 / 56

17
5. Open the service flap.
6.
Check whether a waste ink tank is
installed. The waste ink tank (a)
is located behind the inspection
window (b) underneath the
print head (c). Install if necessary!
7.2 Install the ink cartridges
1. Carefully cut open the ink cartridge pouch and remove the
cartridge. Do not touch the chip on the front edge with your
fingers.
2. Remove the
round opaque
bung from the cartridge’s
air vent.
Keep the plug in a safe place.
The plugs are needed later
when transporting the printer.
3.
Press and hold the ink key (a)
for about one second.
The print head moves to the
replacement position.
The Status LED (b) flashes.
Before pressing the ink button,
the drawer must fully be pulled out.