11
aSSeMBlY
WaRNING
Unintentional sparking can result in fire or electric
shock.
Unintentional start-up can result in entanglement,
traumatic amputation, or laceration.
Fire hazard.
Before performing adjustments or repairs:
•
Disconnect the spark plug wire and keep it away from the
spark plug.
•
Use only correct tools.
•
Replacement parts must be the same and installed in the
same position as the original parts.
•
STOP engine.
•
Avoid serious burns. Allow all parts to cool before
working on machine.
Install Trimmer Head to the cutting Head
1. Align the hole on the cutting head (
a
, Figure 5) to the
notch (
B
) on the spline pad (
c
).
2. Use Allen Wrench (
D
) to hold spline pad in position.
3. While holding Allen wrench in place, install the
trimmer head (
e
) by turning in a counterclockwise
direction.
NOTe:
Ensure that the spline pad is placed in the correct
position when installing. The shoulder side must
face the cutting head.
B
Figure 5
D
a
c
e
Install Trimmer Head Guard
1. Remove the two screws (
a
, Figure 6) from guard.
2. Position guard and saddle (
B
) at hole in straight shaft.
3. Install the two screws through the saddle and into the
guard.
4. Remove third screw (
c
) from the tool set bag, and
install into the drive shaft.
NOTe:
The third screw (
c
) is shorter than the two screws (
a
)
installed in guard.
Figure 6
a
c
B
Not
for
Reproduction
Содержание 866015
