Murray 309029x92C Скачать руководство пользователя | Manualshive

Страница: 15 / 52

background image

OPERATION

15

F-040602L

ATTACHMENTS

This unit can use many different attachments. See the attachment
page in this book. This unit can pull attachments like a lawn
sweeper, a lawn aerator, a hopper spreader, or a small trailer. This
unit can not use attachments that engage the ground like a plow, a
disk harrow, or a cultivator.

For all pull-behind attachments or trailers, the maximum gross

weight is 200 pounds. Gross weight is the weight of the attachment
or trailer and any load that might be on or in it.
Do not operate on a slope that is greater than 10 degrees when
using a pull-behind attachment or trailer. We have included a slope
guide in this book to help you determine the slope on which you will
be operating your unit. Never allow someone to stand or ride on or
in an attachment or trailer.

HOW TO USE
THE THROTTLE / CHOKE CONTROL

Use the throttle/choke control to choke the engine for cold starts
and increase or decrease the speed of the engine (see Figure 5).

1.

Move the throttle/choke control completely forward to the
CHOKE position to start a cold engine.

2.

The FAST position is marked with a detent. For normal opera-
tion and when using a grass bagger, move the throttle control
to the FAST position. For maximum charging of the battery and
for a cooler running engine, operate the engine in the FAST
position.

3.

The engine governor is set at the factory for maximum perfor-
mance. Do not adjust the governor to increase the speed of the
engine.

Throttle

Control

Figure 5

HOW TO USE
THE BLADE ROTATION CONTROL

Use the blade rotation control to engage the blade (Figure 6).

1.

Before you start the engine, make sure the blade rotation con-
trol is in the DISENGAGE position.

2.

To rotate the blade, move the blade rotation control forward
to lock the blade in the ENGAGE position.

3.

To stop the blade, move the blade rotation control to the DIS-
ENGAGE position. Before you leave the operator’s position,
make sure the blade has stopped rotating.

4.

Before you ride the unit across a sidewalk or a road, move the
blade rotation control to the DISENGAGE position.

WARNING: Always keep your hands and feet away
from the blade, deflector opening, and the mower
housing when the engine runs.

Blade Rotation Control

Engage Position

Disengage

Position

Figure 6

«
...
13
14
15
16
17
...
»

Содержание 309029x92C





















































Отзывы:

Нет отзывов

Похожие инструкции для 309029x92C

Бренд: ECLOZ Страницы: 60

Бренд: Rally Страницы: 28

Бренд: Grasshopper Страницы: 56

Бренд: Villager Страницы: 128

Бренд: Gama Garden Страницы: 19

Бренд: Flymo Страницы: 11

Z Master Professional 7500-D Series

Бренд: Toro Страницы: 80

Бренд: Stiga Страницы: 296

Throw Reel Mower

Бренд: Mclane Страницы: 16

Бренд: Toro Страницы: 2

PRO-12 41721209

Бренд: Peco Страницы: 20

73449 Wheel Horse 314-8

Бренд: Toro Страницы: 44

Бренд: Montgomery Ward Страницы: 16

Бренд: Black & Decker Страницы: 4

Бренд: Black & Decker Страницы: 8

Бренд: Black & Decker Страницы: 9

Бренд: Black & Decker Страницы: 8

Бренд: Black & Decker Страницы: 164

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды