Mounting
User manual 57120_hdb_en_12
24 / 70
5.4
Mounting of the bus node
To mount the system, start on the left with the bus node.
1 |
Flap the two locking levers of the bus node upwards (Figure 1).
2 |
Plug the bus node in the DIN rail (Figure 1).
3 |
Flap the two locking levers of the bus node downwards (Figure 2).
4 |
To remove the right bus cover, pull it out towards the front (Figure 2).
5 |
Store the bus cover to use it as termination of the system.
Fig. 5-6: Installing the bus node
