46
ENGLISH
Text
Change filter in
x days
Change filter
Change filterimmediately.
System failure!
--T° too high or too low --
--- FILTER ---
-DID YOU CHANGE THE
FILTER?
--- MANUAL STOP ---
Explanation
The filter is near its lifecycle. It is time to order a replacement.
The filter is clogged. It has to be changed.
The filter is saturated and no longer 100% effective. You risk damaging your device and
fouling your home.
The temperature in the machine exceeds the limit set by the installer or is below 3°C
Question asked when filter is removed. Answer YES only if you have put in a new filter and
cleaned the system (cf. § 7)
See in the “Stop” menus; the fan stops. Follow the instructions to restart the device.
6.1. Information texts
6.2. Error messages
6. INFORMATION TEXTS AND ERROR MESSAGES
This menu is a shortcut to the temporary mode.
Press or to access the menu when the home screen is displayed; Press to quit.
5. FORCED FLOW RATE
Text
No display
(empty screen)
--- NO FILTER ---
---SPEED ERROR ---
--- T° ERROR ---
SPEED TOO HIGH
SYSTEM CLOGGED
EXCESSIVE T°
RECEPTION ERROR
RETRANSMITTED
ERROR
Explanation
Caused by low voltage or power outage
There is no filter in the device.
Speed reading problem.
Temperature reading problem.
Stop because excessively high speed was
detected
Pressure too high.
Abnormal temperature detected in the
device.
Communication problem between the
device and the control panel
Communication problem between the
device and the control panel
Solution
Make sure there is no power outage;
no incidence on the device.
Put in a new filter (see § 7) or clean the sensor
with an antistatic brush.
Call the number displayed on your control
panel.
Call the number displayed on your control
panel.
The system will try to restart in 3 hours.
Call the number displayed on your control
panel
Unplug the device and call the technical
service.
Wait until the device returns to normal.
If the problem persists for more than 24 hours,
contact the after sales service.
Wait until the device returns to normal.
If the problem persists for more than 24 hours,
contact the after sales service.
