Murphy Xpansion IX3212, Справочное руководство

Страница: 33 / 62

Section 80 00-02-0829
2018-02-26 - 31 -
6.5 4 bits Current Limit (Output Channel 5 or 11) 4.3.2.2
6.3 2 bits Feedback Type (Output Channel 5 or 11) 4.3.2.3
6.2 1 bit Automatic Reset (Output Channel 5 or 11) 4.3.2.3
6.1 1 bit High-Side or H-Bridge (Output Channel 5 or 11) 4.3.2.5
7.5 4 bits Current Limit (Output Channel 6 or 12) 4.3.2.2
7.3 2 bits Feedback Type (Output Channel 6 or 12) 4.3.2.3
7.2 1 bit Automatic Reset (Output Channel 6 or 12) 4.3.2.3
7.1 1 bit High-Side or H-Bridge (Output Channel 6 or 12) 4.3.2.5
8 1 byte Reserved (FFh)
4.3.2.1 Output Channel Group Identifier
This identifier is a secondary address that determines which set of outputs will be configured.
6 Output Channels 1-6
7 Output Channels 7-12
Data Length: 1 byte
Resolution:
2 states / 1 byte 0 offset
Data Range:
0 Operational Range: same as data range
Type:
Status (command)
PGN:
PGN 61184 – Configure Output Channels
4.3.2.2 Current Limit
Current Limit sets the steady-state, over-current shutdown level in 2.5A increments.
0 – 0.0 A
1 – 2.5 A
2 – 5.0 A
3 – 7.5 A
4 – 10.0 A
5 – 12.5 A
6 – 15.0 A
7-15 Reserved
Data Length: 4 bits
Resolution: 7 states / 4 bits 0 offset
Data Range: 0 – 15 A Operational Range: same as data range
Type: Status (command)
PGN: PGN 61184 – Configure Output Channels