IR-03063B page 2 of 2
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
Printed in U.S.A.
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. MURPHY, the Murphy logo, and Swichgage
®
are registered and/or common
law trademarks of Murphy Industries, Inc. This document, including textual matter and illustrations, is copyright
protected by Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy Industries, Inc.
www.fwmurphy.com
918.317.4100 Email: [email protected]
NOTES:
1.
* = Standard Component or Range and is not required for ordering, see section notes if section has two parts to specify.
2.
If requirements are outside of the matrix, order panel with free formed text and use the ʻ3050xxxxʼ product
number of the base model.
75160
75160D
PUMP PRESSURE
RANGES
A = 75psi
*B = 150psi
C = 300psi
OIL PRESSURE
RANGES
D = 75psi
E = 100psi
F = 150psi
TEMPERATURE
RANGES
CAPILLARY
G = 220
°
*4 = 4ft.
10 = 10ft.
16 = 16ft.
*H= 250
•
6 = 6ft.
12 = 12ft.
18 = 18ft.
J = 300
°
8 = 8ft.
14 = 14ft.
20 = 20ft.
K = 20TH-320
°
NOTE
: 20TH ONLY, M10 adapter (std.)
maximum capillary 16 ft.
NOTE
: specify length with range-no dash. Both parts must be
standard to leave blank, otherwise specify both parts.
Example: H6
MAGNETIC SWITCHES
*N = 518PH-12
P = 518PH-24
R = MS2120
S = 518APH-12
T = 518APH-24
ADAPTER NUTS
1/8 = 1/8-27 NPT
M10 = 10mm x 1.5
1/4 = 1/4-18 NPT
M12 = 12mm x 1.5
3/8 = 3/8-18 NPT
M14 = 14mm x 1.5
3/8B = 3/8-19 BSPT
M16 = 16mm x 1.5
3/8K = 3/8 NPSF
M18 = 18mm x 1.5
*1/2 = 1/2-14 NPT
M20 = 20mm x 1.5
1/2B = 1/2 BSPT
M22 = 22mm x 1.5
1/2K = 1/2 NPSF
M24 = 24mm x 1.5
5/8 = 5/8-18 UNF
3/4 = 3/4-14 NPT
3/4U = 3/4-16 UNF
7/8 = 7/8-9 UNC
How to Order
*N=518PH-12
P=518PH-24
R=MS2120
S=518APH-12
T=518APH-24
