Murphy MX4 Series, Инструкция по установке и эксплуатации

Страница: 8 / 16

Section 50 00-02-0695
12-06-11 - 4 -
MX4 Jumper Configuration
A CANBUS : Communication Link to Main I/O Module

LK1: This jumper provides a termination resistor for the CAN communication chain.
This jumper must be in place only when the I/O module is the last in the
communication chain. See control panel drawings for designation. The cover of the
MX4 must be removed to access this jumper link (LK1).
(Refer to the
Communications chapter in this document)