Page
16
of
45
Call the AVPro Team at –North America 877-886-5112 Interna1-605-274-6055
b. External – via 3.5mm stereo jack in top of unit. This can be used to generate test
signals such as sinewaves at various frequencies, pink noise, white noise, etc. for
system testing.
9.
Audio Channels
– Allows you to select 32 speaker configurations from 2.0 to
7.1.Regardless of your configuration you will likely be able to use one of our 32
combinations to address all of you speakers and Subs. Currently SIX-G supports 8
channels of audio embedded into HDMI with highest resolution of 192 KHz / 24 bit.
10.
Audio Volume
– Use to control internal sinewave generator volume level.
Note: We use Studio Six tools from an IOS device (IPhone) to get pink & white noise and sinewave
and square wave signals into the HDMI stream for testing.
11.
RGB Triplet
– Use this menu with the window pattern to create any window size color
swatch for advanced measurement. Additionally, you can set the background color using
the same method. You have the possibility of creating over 16K colors. To use press OK
and then up or down arrow to change – press OK again to make the change. RGB triplets
and APL (background color or average picture level (API) - In video systems, the average
level of the picture signal during active scanning time integrated over a frame period;
defined as a percentage of the range between blanking and reference white level.
CalMAN and other calibration software call on specific triplets for more precise calibration
and in the creation of LUTs (lookup tables).
12.
Standby Setting
– Standby Off and Standby On – Allows you to select when SIX-G going
into sleep mode – generally, with no activity (HPD) the unit will shut down after 10
minutes to conserve power.
13.
Save EDID
– On the unit this feature allows you to save up to 6 EDIDs in the field from any
sink (TV/AVR) device. The PC Interface software allows you to do more in depth EDID
functions like moving the EDID you captured in the field to another device or to save the
EDID on the PC for sending to a manufacturer.
14.
Sink EDID Info
– Gives you basic EDID data including preferred timing on the connected
display. PC Interface gives you complete EDID data.
15.
Battery Status
– provides a bar graph of battery charge level.