CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
WATER COOLERS
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
Page 12 of 16
A172.8-UG-VR-D1-BFS
Revised:
02/10/2021
7020-986-001
THE HOLES OF THE UNIT FRAME.
DISCONNECT FROM THE POWER SUPPLY.
PLACE FILTER/BRACKET ASSEMBLY 1 ON INSIDE OF
WATER SUPPLY. IF UNIT IS A REFRIGERATED MODEL,
UNIT FRAME AND ALIGN HOLES IN THE BRACKET WITH
REMOVE THE BOTTOM HOUSING AND TURN OFF UNIT
B-
A-
USE THE SCREWS 2 PROVIDED TO PASS THRU THE
FRAME CLEARANCE HOLES AND SCREW INTO THE
C-
CONNECT NEW PE TUBE PROVIDED WITH FILTER TO
EVAPORATOR PUSH-IN INLET, WHERE TUBE WAS
UNION 4 TO WHERE IT CONNECTS TO THE EVAPORATOR.
E-
F-
D- FOLLOW PE TUBE FROM "Y" STRAINER 3 OR PUSH-IN
WATER FILTER HAS 1500 GALLON CAPACITY, CARTRIDGE
WILL REQUIRE REPLACEMENT AFTER 50 HOURS OF ACTUAL
OPERATIONAL USAGE. FREQUENCY OF FIXTURE OPERATION
REPLACEMENT.
WILL DETERMINE TIME FRAME FOR CARTRIDGE
IMPORTANT: FLUSH 5 GALLONS OF WATER THRU THE
G-
TURN ON WATER. CHECK FOR LEAKS.
FILTER BEFORE ALLOWING FIXTURE USE.
3
CHECK UNIT FOR PROPER OPERATION.
RE-INSTALL BOTTOM HOUSING.
I-
IF REFRIGERATED UNIT, TURN ON POWER SUPPLY AND
H-
DISCONNECT TUBE FROM EVAPORATOR, CONNECT TO
REPLACEMENT.
TO DISCONNECT THE TUBE FROM THE PUSH-IN FITTING
TUBE HOLD DOWN GRIPPER AND PULL TUBE OUT
SLOWLY.
WAY TO MAKE A GOOD CONNECTION. CARTRIDGE
TO CONNECT PUSH-IN FITTINGS, PUSH TUBE IN ALL THE
1-
2-
1
1/4" PUSH-IN OUTLET
2
REPLACEMENT CARTRIDGE
-WF1 PART # 7012-313-000
-WF3 PART # 7012-317-000
BRACKET HOLES.
REMOVED.
FILTER INLET PUSH-IN CONNECTION.
4
INSTALLATION INSTRUCTIONS:
NOTES:
-WF1 FILTER CARTRIDGE INSTALLATION:
IMPORTANT:
-WF3 FILTER CARTRIDGE INSTALLATION:
WATER FILTER HAS 3000 GALLON CAPACITY, CARTRIDGE
WILL REQUIRE REPLACEMENT AFTER 100 HOURS OF ACTUAL
OPERATIONAL USAGE. FREQUENCY OF FIXTURE OPERATION
REPLACEMENT.
WILL DETERMINE TIME FRAME FOR CARTRIDGE
