Murata WSN802G Скачать руководство пользователя страница 48

Страница: 48 / 102

gsnap1wepkeylen

- this parameter sets the WEP key length in bytes for access point 1. The range of this

parameter is 0x00000005 to 0x0000000D (5 to 13). This parameter is write-only. Attempting to read a
write-only SNMP parameter returns an error.

gsnap1wepkeyval

- this parameter holds the WEP key ASCII string for access point 1, 5 to 13 bytes. The

number of bytes must match the WEP key length. This parameter is write-only. Attempting to read a write-
only SNMP parameter returns an error.

gsnap1pskpassphrase

- this parameter holds the PSK passphrase for access point 1. This parameter is

write-only. Attempting to read a write-only SNMP parameter returns an error.

gsnap1authmode

- this parameter sets the authentication mode for access point 1 as follows:

0x00000001 - open authentication, allows connection to a WLAN with any type of authentication

0x00000002 - shared authentication, allows connection to a WLAN only with WEP shared

authentication; must be used to connect to a WEP shared WLAN

0x00000003 - automatic authentication, allows connection to a WLAN with any type of

authentication

0x00000004 - WPA authentication, allows connection to a WLAN with WPA/WPA2 802.1x

authentication; WPA2 is selected over WPA if both are present

0x00000005 - WPAPSK authentication, allows connection to a WLAN with WPA/WPA2

authentication; WPA2 is selected over WPA if both are present

0x00000007 - WPA2 authentication, allows connection to a WLAN with WPA2 802.1x authentication

0x00000008 - WPA2PSK authentication, allows connection to a WLAN with WPA2 PSK

authentication

gsnap1encmode

- this parameter selects the encryption mode for access point 1 as follows:

0x00000001 - allows connection to a WLAN only with WEP encryption

0x00000004 - allows connection to a WLAN only with TKIP encryption, either unicast or group;

it connects if either unicast cipher or group cipher is TKIP

0x00000020 - allows connection to a WLAN only with CCMP encryption, either unicast or group;

it connects if either unicast cipher or group cipher is CCMP

0x00000080 - allows connection to a WLAN only with no encryption

0x000000A5 - allows connection to a WLAN with any of the above modes

Note that encryption mode 0x000000A5 is derived from logically ORing the values of the four encryption
modes above it. Any combination of ORed encryption modes are allowed.

gsnap1pskkey

- this parameter this parameter holds the PSK key for access point 1. This parameter is

write-only. Attempting to read a write-only SNMP parameter returns an error.

gsnAp2Ssid

- this parameter holds the SSID for access point 2.

gsnAp2Channel

- this parameter sets the channel of operation for access point 2.

gsnap2wepkeyid

- this parameter sets the WEP key ID for access point 2. The range of this parameter is

0x00000000 to 0x00000003. This parameter is write-only. Attempting to read a write-only SNMP parame-
ter returns an error.

HN-210D/X, HN-214 D/X Rev. 2.0 01-16-15

Page 48 of 101

www.murata.com

Содержание WSN802G







































































































Результаты поиска

Содержание WSN802G

Отзывы:

Бренды по названию

Популярные бренды

Murata WSN802G, Руководство по интеграции

Результаты поиска

Содержание WSN802G

Отзывы:

Бренды по названию

Популярные бренды