11
© Munters Corporation, May 2017
QM1044r5
Cabling
Chapter 3
Figure 7C
Step 7
Put a Nylon Guide Link [M] (black) on each Screw Hook [L] that is directly above the Lift Bracket [A] of
each inlet. Attach one Lift Line to Main Cable using (1) Cable Clamp [N]. Lift line should be attached 14”
back from hook toward the winch end. Run each lift line through the adjacent Nylon Guide Link [M] and
attach Azuma Bolt and Nut [K].
See Figure 7A , 7B and 7C.
ý
þ
ÿ
ý
þ
ÿ
ý
þ
ý
þ
þ
ý
þ
ý
þ
ÿ
ý
þ
ÿ
ý
þ
ý
þ
ý
þ
þ
Figure 7B
Figure 7A
Note:
If optional kit, Lift Package (FA1500) was purchased, hardware mentioned below in
Step 7
is included. If
not purchased, hardware provided by others.
