10
|
© Munters AB, 2020
•
trolley: when loading the fan on the trolley make sure fan shutter is positioned outwards;
•
forklift: before loading, make sure the forks are opened as much as possible to avoid bending of the fan bottom
panel and damaging the shutter;
•
crane: fix two bolts in the M8 bushes situated on the sides of the fan housing and hook the lifting cable over the
bolts
WARNING
Make sure a steel cable or rope of adequate size is being used when the fan is lifted by crane. Fan
weights are shown in the technical specification table (see section 7.1).
3.3 Structure
The fans consist of the following components:
•
fan housing in Munters Protect coated steel without welding spots;
•
fan shutter in Munters Protect coated steel, which pivots on UV protected plastic bushes and pins;
•
propeller with six blades in stainless or Munters Protect coated steel; blades are fixed to the propeller by high-
strength pop rivets;
•
asynchronous three-phases motor; 60 Hz; B3 form; F class winding insulation, IP55 protection class; single-
speed;
•
centrifugal operated shutter opening device.
