Munters EC50, Инструкция по сборке

Страница: 28 / 44

28 | © Munters AB, 2020
Insert the rear fixed flange w/bush
(
ref. 32 ) on the propeller axle.
Insert the M25 hex nut ( ref. 49 ).
Tighten the nut by using a
pneumatic screw-driver (ref. 3/
Assembling tools) equipped with a
36 mm spanner (ref. 8/ Assembling
tools) by applying a torque of 60
Nm.
Insert the complete assembly
paying attention to center the holes
of the front flange with the ones of
the rear fixed flange w/bush.
Fix the complete assembly to the
rear fixed flange w/bush with qty. 6
M8x16 hex socket head cap screws
(ref. 50) and qty. 6 M8 hex nuts (ref.
37).
Tighten them with a closing torque
of 20 Nm.