Munters ComDry, Дополнительные эксплуатационные инструкции

Страница: 12 / 20

ComDry Control System
2 Menus and parameters
To set the system parameters, see 1.11, Change the system settings and 1.13, Reset the counters . For limits when
setting parameters, see 2.7, Min, max and default values .
2.1 Humidity
The dehumidifier is always operating in automatic mode. It will dehumidify until the desired humidity level
(Set Value minus Hysteresis value) is reached. Then the green operating indicator will start to flash in a long
on and short off sequence, indicating that the dehumidifier is in stand-by. It will start to dehumidify again
when the humidity is equal to, or greater than the Set Value.
Type of humidity control (relative humidity, dew point or absolute humidity) and unit system (metric or
imperial) governs the readings and settings in this menu. See
2.5, Functions for reference and explanation.
Display view Description Type Setting option
Internal sensor reading READ ONLY D1.../ X1...
(External sensor reading)
1
READ ONLY D2.../ X2...
Set Value Humidity ADJUSTABLE HIGHER/LOWER
Hysteresis
ADJUSTABLE HIGHER/LOWER
Controlling sensor (ADJUSTABLE)
1
(*RH2)
1
, (*RH3)
1
1)
Only when external humidity sensors are connected
10
Menus and parameters
MEN-CDCS-A1808