Munters ComDry M160L, Руководство пользователя

Страница: 8 / 32

3. Function overview
The desiccant rotor is the adsorption dehumidifying component in the unit. The rotor structure is com-
prised of a large number of small air channels.
The desiccant rotor is made of a composite material that is highly effective in attracting and retaining
water vapour. The rotor is divided in two zones.
The airflow to be dehumidified, process air , passes through the largest zone of the rotor and then
leaves the rotor as dry air . Since the rotor rotates slowly, the incoming air always meets a dry zone on
the rotor, thus creating a continuous dehumidification process.
The airflow used to dry the rotor, reactivation air , is heated. The reactivation air passes through the
rotor in the opposite direction to the process air and leaves the rotor as wet air (warm, moist air).
The wet air re-circulates through a condenser that cools the air to condense the water using a part of
the process air.
The condensed water is drained through a hose.
This principle enables the dehumidifier to work effectively, even at low temperatures from 0 °C.
1
3
2
Airflows
1. Process/Reactivation air
2. Dry air
3. Cooling air out
ComDry M160L Dehumidifier
8