Munters ComDry M160L, Руководство пользователя

Страница: 21 / 32

C
B
Press the On/Off button (C) once to start the dehumidifier.
If the measured humidity is lower than the Set Value, the green operating indicator (B) will start to flash
in a long on/short off sequence. Depending on fan mode setting, the process fan will run or not. The unit
is now in stand-by mode.
The dehumidifier starts to dehumidify when the measured humidity is equal to or greater than the Set
Value, and the operating indicator (B) will shift to continuously lit.
6.7. Stop the dehumidifier
CAUTION
Only quick stop the dehumidifier in case of an emergency. The fan stops and the heat-
er can be very hot, which can result in damage to the heater and other components
close to it.
Press On/Off once to stop the dehumidifier.
The green operating indicator starts flashing with equally long and short on and off periods.
The unit continues to run for a while in order to cool down and then stops.
6.8. Automatic start after power failure
The dehumidifier will revert to operation after a power failure if it is set to ON, regardless of if it was
running or in stand-by.
ComDry M160L Dehumidifier
21