Step 3. Installation.
1. Grasp the handle on the chassis and carefully slide the air conditioner out of the cabinet (See Fig.5).
2. Remove shipping pad from around compressor before operation and make sure the discharge points
to the drain pan are aligned before the chassis is pushed into the cabinet (See Fig.6).
3. Push the unit chassis into the cabinet (See Fig.7).
Step 4. Install the frame.
1. Install the frame and connect the coupler plugs, making sure not to interfere with the temperature
sensor cable (See Fig.8).
2. Fix the screws on the frame (See Fig.3A,3B,3C,3D).
Step 5. Install the air filter and front panel.
1. Install the air filter into the frame's slot from upside to underside (See Fig.2).
2. Hang the front panel on the frame's buckle, then press the front panel into the frame's slot until you
hear a click (See Fig9).
5
6
7
8
9
14
Minimum norminal cross-sectional area of conductors:
Rated current of appliance
(A)
Nominal cross-sectional area
2
(mm )
0.75
1
1.5
2.5
