mundoclima MUENR-30-H9T, Инструкция по установке и эксплуатации

Страница: 71 / 112

8.3 System diagram
8.3.1 Diagram of MUENR-30-H9T and MUENR-30-H9T(K)
Fig.8-5 function diagram
Fig.8-5 is the function diagram
LQOHW
RXWOHW
Table 8-2
Legend
1 DC Inverter compressor 23 Safety valve
2 Crankcase heater 24 Gas-liquid separator
3 DC Inverter compressor discharge temperature sensor 1 25 Suction temperature sensor (Th)
4 DC Inverter compressor discharge temperature sensor 2 26 Filter
5 Discharge temperature control switch (TP-PRO) 27 Capillary
6 High pressure switch 28 Fast oil return solenoid valve
7 Oil separator 29 Low pressure switch (L-PRO)
8 4-way-valve 30 Filter
9 System pressure sensor (H-YL) 31 Capillary
10 DC fan 32 Outdoor ambient temperature sensor (T4)
11 Condenser 33 Unit water inlet temperature sensor (Twi)
12 Coil outlet temperature sensor (T3A ) 34 Safety valve
13 K>;;;+<;><<]J\„` 35 Air purge valve
14 Filter 36 Unit water outlet temperature sensor (Two)
15 Electronic expansion valve 37 ‚;<Q³³;W
16 Filter 38 Manual water drain valve
17 High pressure tank 39 Total outlet water temperature sensor (Tw)
18 Antifreeze heater of plate heat exchanger 40 Plate heat exchanger
19 Water side antifreeze temperature sensor 2 (Taf2) 41 Capillary
20 Water side antifreeze temperature sensor 1 (Taf1) 42 Electromagnetic valve
21 Stop valve 43 Water pump (only models (K) with hydronic kit)
22 Stop valve 44 Expansion tank (only models (K) with hydronic kit)
43 and 44 only models (K)
with hydronic kit
71