mundoclima CL20007, Инструкция по установке и эксплуатации

Страница: 41 / 84

5 . iFEEL
*
Press this button to set the temperature display on the
remote controller to ambient temperature and press this
button again to set it to preset temperature.
6 . TIMER
*
With the unit ON, press this button to set OFF timer or with
it OFF to set ON timer.
*
Press this button once, a “ON(OFF)” will flash. Press “ ” or
“ ”to set the number of hours in which the unit will be turned
ON/OFF, with an interval of 0.5 hour if less than 10 hours, or
1 hour if longer than 10 hours , and a range of 0.5-24 hours.
*
Press it again to confirm the setting, the “ON (OFF)” will
stop flashing.
*
If the timer button is not pressed longer than 10 seconds after
the “ON (OFF)” start flashing, the timer setting will be exited.
*
If a timer setting is confirmed, pressing this button again will
cancel it.
Note: When a ON timer is set, all function buttons (except SLEEP,
DISPLAY and iFEEL can't be set ) are valid and when the ON time
set is up, the unit will operate as preset.
7. This button has no function.
*
increase by 1 ℃ and each time the “ ” is pressed, it will
decrease by 1 ℃ .
*
The temperature setting ranges from 16 ℃ (60 ℉ ) ～ 32 ℃ (90 ℉ ).
Note: The temperature cannot be set in AUTO or FAN mode, thus
these two buttons are not functional.
Each time the “ ” is pressed, the temperature setting will
8 .
or
4. DISPLAY
*
Press this button to turn on/off the display. This is for the
convenience of users who are unconformable sleeping with
the backlight on.
41