mundoclima CL 20 810, Инструкция по установке и эксплуатации

Страница: 9 / 26

5
＊
Press the fixing knob of the air intake grills, the grilles will be opened wider and
then pull them out from the indoor.
＊
Remove the side panel fixing screw and pull to the front direction (arrow
direction) to remove. Side panel fixing screw. (Refer to Fig.3)
＊
Loosen two hanger bracket setting bolts (M8) on eath side for less than 10mm.
Remove two hanger bracket fixing bolts (M6) on the rear side. Detach the hanger
bracker by pulling it backward (Refer to Fig.5).
Fig.2 Fig.3
c. Set the suspension bolt. (Use W3/8 or M10 size suspension bolts)
＊
Adjust the distance from the unit to the ceiling slab beforehand. (Refer to Fig.4)
d. Fix the hanger bracket to the suspension bolt.
Warning
！
＊
Make sure that extended suspension bolt from the ceiling stays inside the
arrowed position. Readjust the hanger bracket when it is outside the arrowed position.
(Refer to Fig.6)
＊
Suspension bolt stays inside the cap of indoor unit. Never remove the cap.
e. Lift the unit and slide forward unit the dent. (Refer to Fig.7)
f. Screw tightly both hanger bracket-setting bolts (M8). (Refer to Fig.5)
g. Screw tightly both hanger bracket-fixing bolts (M6) to prevent the movement of
the indoor unit. (Refer to Fig.5)
h. Adjust the height so that rear side of the drainpipe slightly inclines to improve
drainage.
Caution
！
＊
Adjust the height by turning the nut with a spanner.