Getting Started
5
Important Information
4
INTRODUCTION
Thank you for choosing a Munchkin safety gate to help protect your family. Your gate stays
in place by creating pressure between two opposing surfaces.
For maximum security, DO NOT use this gate in any location without installing all 4
wall cups, sticky pads, and screws provided. In some opening only 2 top wall cups can
be fitted.
Please inspect your gate immediately. If you see any damage, do not attempt installation.
Check page 16 of this manual for information on damaged products.
Assemble the gate away from small children. Some of the parts may present a choking
hazard when loose.
PLEASE NOTE:
There is a gap between your gate frame and handle.
This is not a defect. This gap will close once your gate is properly
installed. Please check the gate on a regular basis to ensure that
all parts are in proper working condition.
DISCLAIMERS
Any misuse, abuse, abnormal use, excessive wear and tear, improper assembly,
negligence, environmental exposure, accident or alteration of the gate, as well as removal
or alteration of its serial number, invalidates any and all claims against the manufacturer.
Any damage to property during installation is the sole responsibility of the end user.
WARNING:
• Children have died or been seriously injured when gates are not
securely installed.
• ALWAYS install and use gates as directed using all required parts.
• STOP using when a child can climb over or dislodge the gate.
• Use only with locking mechanism securely engaged.
• NEVER use a gate to keep child away from pool.
• Install according to manufacturer’s instructions.
• Intend for use with children from 6 months through 24 months.
• This product will not necessarily prevent all accidents. Never leave
child unattended.
INCLUDED PARTS
If any parts are missing or damaged, please contact our Customer Satisfaction Team
at
1-800-344-2229
.
TOOLS NEEDED:
• Drill
• Phillips screwdriver
• Flathead screwdriver
• Pencil
• Tape measure
Wall Anchor (x4)
Wall Screw (x4)
Wall cup & round
sticky pad (x4)
Wrench
Gate (x1)
Small lower
extension
adapter (x1)
Medium lower
extension
adapter (x1)
2.75" (7cm)
Small
extension (x1)
5.5" (14cm)
Medium
extension (x1)
Medium upper
extension
adapter (x1)
Small upper
extension
adapter (x1)
Adjustment rod with
threaded nut (x4)
