- 17 -
- 18 -
6.0 FAQ
Q1:
Why is there no light when scanning?
A1: First make sure that "Enable Scanner" is turned on and the
keycode entered is correct.
Left scan key: 139
Right scan key: 139
Q2
：
Why can't my newly purchased device be turned on, even after
charging for more than half an hour?
A2: It must be that the insulation sticker of the battery has not been
torn off, please tear off the insulation sticker of the battery before
turning on the machine. In addition, you should use the original
adapter and cable otherwise the machine will not be charged or
even be damaged.
Q3:
How to use the battery correctly?
A3: The battery is Li-ion battery. Please immediately charge the
battery when the power is less than 20%. Don't keep the battery
with full power or no power for a long time. The best way to
store it is to keep 50% power of the battery. And if you don't use
the PDA for a long time, it is better to pull out the battery
from PDA.
Q4:
The device cannot be charged.
A4: (1) Check the adapter and charging port for malfunction.
(2) If the device is not used for a long time, please keep it
charged for 30 minutes. Then check the device lights on or not.
(3) Replace the battery with the new one. And check device or
battery for malfunction.
Need Tech Support ,Contact Us by:
MUNBYN provides 18 months warranty and lifetime free service.
If you encounter any issues with the product, please contact the
MUNBYN team to promptly receive troubleshooting tips or
a replacement.
Email:
[email protected] (24-7 online support)
Website:
www.munbyn.com (how-to videos, warranty details)
WhatsApp:
+8617817881067
