User Manual
m-RMAG — Smoke detector magnetic fixing
Please refer to the respective manual for the installation and commissioning
of the smoke detector.
• Take the carrier plate and remove the protective sheet.
Hint
For an easier detachment, an acute object such as a knife or a pin is
suitable.
• Place the carrier plate at the intended position on the ceiling.
• Take the carrier plate, remove the protective sheet as well and place it on the
back of the smoke detector.
• Mount the smoke detector after 24 hours on the ceiling, by putting the mag-
netic plate on the carrier plate. Please pay attention that all magnets are in
contact to ensure a secure mounting.
In Order to remove the smoke detector from the ceiling, just push it across the
ceiling from the carrier plate.
For security reasons please do not reuse this product.
This magnetic fixing is only suitable for smoke detectors with a cross-section
dimension of 8-15cm and a maximum weight of 275g. Please use the magnetic
fixing only on a plain surface. Place the fixing on the ceiling and the smoke
detector. Wait 24 hours before you bring both parts together.
Not suitable for vinyl wallpapers, styrofoam®, siliconized, nonstick or teflon
covered surfaces.
made in China
GB
Carrier plate for
ceiling suspension
Magnetic plate
for smoke detector
assembly