9261-9210 EKOPAG/QUG/Iss. 4
6 of 14
Raising and clearing alarms
•
When an alarm is raised a text message is sent to configured group of pagers.
•
The text includes the raising device’s identity, the alarm type that has been activated
and the current location of the device.
•
On clearance of an alarm, a text message is sent with the device’s identity stating the
alarm has been cleared.
•
Upon receiving a message, the pager will sound an alert, vibrate and activate the
backlight (depending on profile settings) and the message will be displayed.
Emergency Alarm (red button): (if enabled)
•
Single click or double click, (depending on configuration) raises an emergency alarm.
•
The alarm is sent out to the pagers/users configured by the administrator.
•
Use
the
◄
button to clear the alarm.
•
The alarm will be re-sent at an interval configured by administrator, until the alarm is
cleared.
Assist Alarm (blue button): (if enabled)
•
Single click raises assist alarm and automatically returns to normal state (no alarm
clear necessary).
•
The alarm is sent out to the pagers/users configured by the administrator.
Wander alarm (if enabled)
•
Zones which are restricted, are set and configured by the administrator.
•
Upon entering one of these restricted zones, the pager will activate a response (as
configured by the administrator):
o
Audible and vibrate alert
o
Audible
alert
o
Vibrate
alert.
•
The message ‘unauthorised zone’ will also appear on the pager screen.
•
The alarm is sent out to the pagers/users configured by the administrator.
