9261-9210 EKOPAG/QUG/Iss. 4
3 of 14
EkoTek Pager Accessory Guide
Pager accessories from left to right:
1. Clip - For those staff wishing to wear the device on a belt or other item of clothing
2. Lanyard plate – With a hole for affixing a lanyard
3. Blanking plate – Used for when a clip or lanyard are not required
4. Clip removal tool – Used to aid in the removal of the plates
5. Snatch cord – Used in conjunction with the snatch cord alarm. Should the pager or
cord be snatched, an alarm will be raised, see the full user guide for further
information.
6. Blanking pin – Used to block the snatch cord hole, should the alarm not be required.
Usage instructions
•
To insert a plate, slide the clip downwards into the back of the pager.
•
To remove a back plate, whether it be the clip or lanyard, insert the removal tool into
the top of the plate between the metal and the device, pushing the metal away from
the pager. Then slide the plate upwards and out of the pager.
•
To use the snatch cord or blanking pin, line up the grooves with the hole found on the
top left side of the pager and insert.
Please be aware that once the blanking pin is inserted, it is non-removable
