![background image](http://html1.mh-extra.com/html/multitech/zpx-multimodem-mt5634zpx-pci-v92/zpx-multimodem-mt5634zpx-pci-v92_user-manual_1856131052.webp)
5 Remote Configuration
47
MultiModemZPX User Guide
4. The new password is saved automatically. You can now either enter more AT
commands or exit the data communications program. The next time you wish to
set up the modem, you must use the new password.
To Change the Remote Escape Character
To further improve security, you can change a remote modem’s remote configuration
escape character either locally or remotely. The remote configuration escape charac-
ter is stored in register
S9
. The factory default is 37, which is the ASCII code for the
percent character (%). Setting
S9
to 0 (zero) disables remote configuration entirely.
CAUTION:
If you do this remotely, you won’t be able to change it back remotely.
1. Establish a remote configuration link with the remote modem as described in
“Basic Procedure.”
2. Type
ATS9=
n
, where
n
is the ASCII code for the new remote configuration es-
cape character, and then press E
NTER
.
3. Save the new value by typing
AT&W
and pressing E
NTER
.
4. Type
ATO
and press E
NTER
to exit remote configuration.
Содержание Zpx Multimodem MT5634ZPX-PCI-V92
