Multitech RouteFinder RF802WLC, Быстрый старт

Страница: 13 / 30

8
:LQGRZV17,QVWDOODWLRQ
1. With Windows NT networking installed, start your computer.
2. Insert the RF802WLC card into an open PCMCIA card slot.
3. Insert the System CD in the CD-ROM drive and double-click the
Setup
icon.
4. Accept the license agreement.
5. Select
SSID
. (The default is
ESSID
; you can change this later
using the Configuration utility or network configuration.
Click
Next
.
6. Select network type and click
Next
. The default is
Infrastructure
.
7. Give the path of the destination folder. To set the path of your
choice click
Browse
and then click
Next
.
8. Setup will add program icon to the Program Folder. You may
type a new folder name, or select one from the existing Folder
list.
9. It takes a few seconds for copying the utility files. Click
Finish
.
10. In the Microsoft TCP/IP properties table,
select Internet protocol
(TCP/IP
), then select
obtain an IP address automatically or set
your own IP address
. Click
OK
.
11. Restart your computer.
:LQGRZV178QLQVWDOODWLRQ
To uninstall the RF802WLC under Windows 2000, click
Start
, point
to
Programs
, then click
Uninstaller of Wireless LAN 11Mbps PCMCIA
Card
. Confirm message about removing the
"Wireless LAN 11 Mbps
PCMCIA Card"
and all of its components appear. Click Yes.
Uninstall Shield removes the software. Click
OK
to finish the
uninstall procedure.
Important: Restart your computer to make the changes effective
before you reinstall the driver.