background image

REVEAL WIRELESS ACCELERATION BASED MOVEMENT SENSOR

2

Wireless Acceleration Sensor User Guide

Reveal Wireless Acceleration Based Movement Sensor

Model: RBS301-ABM

Part Number: RB00004 rev. 1.0

Trademarks and Copyright

Copyright

This publication may not be reproduced, in whole or in part, without the specific and express prior written permission signed by an executive officer of
Multi-Tech Systems, Inc. All rights reserved. Copyright © 2022 by Multi-Tech Systems, Inc.

Trademarks and Registered Trademarks

MultiTech, the MultiTech logo, DeviceHQ, xDot, and Conduit are registered trademarks and Reveal and mDot are trademarks of Multi-Tech Systems, Inc. All
other products and technologies are the trademarks or registered trademarks of their respective holders.

Disclaimers

Information in this document is subject to change without notice and does not represent a commitment on the part of Multi-Tech Systems, Inc.. Multi-Tech
Systems, Inc. provides this document “as is,” without warranty of any kind, expressed or implied, including, but not limited to, the implied warranties of
fitness or merchantability for a particular purpose. Multi-Tech Systems, Inc. may make improvements and/or changes in this manual or in the product(s)
and/or the software described in this manual at any time.

Legal Notices

See the

Legal Notices

section of the website for up-to-date information on MultiTech warranty, returns policy, privacy statement, terms of sale, and terms

of service.

Customer Support

MultiTech offers free technical support for Reveal sensors at:

https://support.radiobridge.com

MultiTech also offers technical support plans and service packages to help our customers get the most out of their MultiTech products.

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive, Mounds View, MN 55112

Содержание REVEAL RBS301-ABM





















Отзывы: