Multitech MultiVOIP 800 MVP800, Быстрый старт

Страница: 37 / 43

37
Software Installation
Deploying the VOIP Network
Deploying the VOIP network involves the VOIP Administrator
developing the VOIP Dialing Directory and deploying the
preconfigured client MultiVOIPs to their remote sites. The
remote site administrators need only connect power to the
preconfigured MultiVOIP, connect it to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
The client units can be another MVP800 or MVP400 unit or a
MultiVOIP 200-Series. Therefore, the deployment procedure
for the remote site administrator may be more general, so you
may need to refer to the Cable Connection Figure in the
appropriate Quick Start. Perform the following procedure to
deploy your VOIP Network.
VOIP Administrator
1. Establish your VOIP Dialing Directory based on your
Phone Directory Database for the numbers to connect the
MultiVOIP’s to your VOIP network and the telephone
extension number you need to connect the Voice/Fax
channels. A sample VOIP Dialing Directory is provided
below for your consideration and use.
To call from
Call Process
Dialing
Sequence
VOIP Dialing Directory
2. Send the client MultiVOIPs to their remote sites.