Multitech MultiVOIP 400, Руководство пользователя

Страница: 32 / 88

32
MultiVOIP User Guide
3 The IP Setup dialog box is displayed.
The default Frame Type is TYPE_II. If this does not match your IP network, change the Frame
Type by clicking on the drop down box. The Frame Type choices are TYPE_II and SNAP.
4 In the Port Address group, enter the IP Address and IP Mask. In the Gateway Address
group, enter the gateway IP address for the slave unit.
The IP address is your unique LAN IP address, and the Gateway address is the IP address of
the device connected to the Internet/Intranet.
Click OK when you are finished. The main menu is displayed.
5 From the main menu, click on the Voice Channels button and the Channel Setup dialog box
is displayed. The Channel Setup dialog boxes define the channel interface, voice coder, fax
parameters, and regional telephone parameters for each channel.
Configure each channel for the type of interface you are connecting to. The Interface tab
defaults to channel 1 in the Select Channel group. To change the channel number, click on
the down arrow for the Select Channel and a drop down menu appears with all the channels
displayed. Highlight the channel number you want to configure.
6 The Interface group defaults to FXS (Loop Start). Select the interface option to correspond
to the interface type being connected to the Voice/Fax connector on the back panel of the
MultiVOIP.
If you are connecting a station device, e.g., analog telephone, fax machine, or Key Telephone
System (KTS) to the Voice/Fax connector on the back of the unit, then the FXS (Loop Start)
will likely be the correct Interface option.
If the station device uses ground start, then chose FXS (Ground Start) option. Refer to the
device’s user documentation.