Chapter 3 – Software Installation
MultiModem ISI Server Cards User Guide
29
8.
View the Device Manager as the Modems are being installed. For the ISI 1-4, the installation wizard must
install four Multifunction Devices. Similarly, for the ISI 1-8, the installation wizard must install eight
Multifunction Devices under Other Devices.
When MultiTech Systems MT9234SMI #8 is displayed, the eight modems on the ISI Card are successfully
installed.
9.
When all modems have been installed, you need to reboot.
Completion
Software installation for the ISI Card is complete. You may need to configure the modem for your country/region,
refer to ‘
Configure the modems for your Country
’ at the end of this chapter.
Verification
You can verify successful installation of the ISI Card, the ports, and the modems by going to
Start I Control
Panel I System.
Select the
Hardware
tab and click on
Device Manager
to view a list of devices. Then click on
"Multi-port serial adapters" to view the entry for the card driver. Click on "Ports (COM & LPT)" to view the list of
ports established. Click on "Modems" to view the list of modems installed to the ports.
Subsequent Installations
After any ISI Card has been installed in a computer, the sequence for installing any additional boards will be
different. Some screens in the installation wizard will be omitted, making the process somewhat shorter. Because
the installation affects the computer's registry, even if an ISI Card has been uninstalled after its initial installation,
any subsequent installation will be shortened in this way.
Un-Installing your ISI Unit
Conduct the un-installation in this order: remove the modems associated with the ISI Card first, then the ports, and,
finally, the ISI Card. Following this procedure will ensure removal of all ISI components. We present details below.
electronic components distributor
