background image

Regulations

46-MultiMobile

contains in a margin at the top or bottom of each

page or on the first page of the transmission, the date

and time is sent and an identification of the business

or other entity, or individual sending the message and

the telephone number of the sending machine or such

business, other entity, or individual.  In order to

program this information into your fax machine

please refer to the installation instructions.

Manufacturer:

Multi-Tech Systems, Inc.

Trade Name:

MultiMobile

Model Number(s):

MT10ZLX/E

MT10ZLX/E-T/2

FCC Registration #:

Modular Jack (USOC):

RJ45

Service Center  in USA: Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, MN 55112

Phone:  (612) 785-3500

Fax:  (612) 785-9874

NOTE: This equipment has been tested and found to be

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules.  These limits are

designed to provide reasonable protection against harmful

interference when the equipment is operated in a residen-

tial installation.  This equipment generates, uses and can

radiate radio frequency energy, and if not installed and

used in accordance with the instruction manual, may cause

harmful interference to radio communications.  However

there is no guarantee that interference will not occur in a

particular installation.  If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one

or more of the following measures:

All manuals and user guides at all-guides.com

all-guides.com

Содержание MultiMobile MT10ZLX/E-T/2






















































Отзывы: