Multitech MultiConnect xDot MTXDOT Series, Руководство разработчика

Страница: 63 / 67

MOUNTING XDOTS AND PROGRAMMING EXTERNAL TARGETS
MultiConnect
®
xDot
TM
MTXDOT Developer Guide 63
Warning: Electrostatic discharge (ESD) can damage the MTMDK-XDOT. Potential failure via ESD through the
JTAG headers include the MTMDK-XDOT processor, level converters, and potentially the target device.
To use the external target programming header:
1. Use a 10-position ribbon cable to connect xDot developer board header JP1 to the SWD programming
header on your custom board.
1
2. Apply power to your target board.
3. Use the Mbed programming environment as normal.
Schematic Example
Schematic example shows programming header connections for xDot on custom board.
1
MultiTech recommends the Samtec FFSD-05-D-06.00-01-N ribbon cable.
Recommended Programming Hardware for Production
Note: MultiTech does not recommend using the MTMDK-XDOT developer board for production programming. It
doesn't have ESD protection, isn't enclosed, and wasn’t tested to be a robust solution for production.
MultiTech recommends using the following programming hardware for production:
Segger J-Link programmer - SEG-JLINK https://www.segger.com/products/debug-probes/j-link
J-Link 9-Pin Cortex-M Adapter - https://www.segger.com/products/debug-probes/j-
link/accessories/adapters/9-pin-cortex-m-adapter