DEVICE ADMINISTRATION
76
MultiConnect
®
rCell 100 MTR-LTE User Guide
Configuring Remote Syslog
To enable and configure Remote Syslog to capture and send log data from your device, you must have local syslog
software installed.
To set up a log request in DeviceHQ
TM
, under
Devices
, select your device. Then click on Tasks and select
Request
Device Logs
. After the request has been completed, return to the device administration software.
1.
To activate
Remote Syslog
, go to
Administration > Debug Options > Logging
under
Remote Syslog
, check
Enabled
.
2.
To enable a remote server to receive and store the device's log data, in the
IP Address
field, type the IP
address of the desired server.
3.
To determine the amount of log information that is collected, in the
Debug Log Level
, select the type of
information from the values in the dropdown menu which includes:
Minimum, Error, Warning, Info,
Debug,
and
Maximum
. The system will collect the type of information you specify. For example,
Maximum
will collect all the log data available while
Warning
will collect anything that is a warning or
above that level.
4.
To download syslog information directly from the device, click
Download
.
5.
Click
Submit
.
6.
To save your changes, click
Save and Restart
.
Statistics Settings
To configure
Statistics
:
1.
Go to
Administration > Debug Options > Statistics
.
2.
Enter the
Save Timeout
in seconds.
3.
Enter the
Save Data Limit
in megabytes.
4.
To delete cell activity history, click
Delete Cellular History
.
5.
To delete ethernet history, click
Delete Ethernet History
.
6.
Click
Submit
.
7.
To save your settings, click
Save and Restart
.
Ping and Reset Options
Perform a Ping Test
Ping allows you to test the IP address or URL to ensure it is operational.
To perform a ping test:
1.
Go to
Administration > Debug Options > Ping
.
2.
Enter the
IP address or URL
of the site you wish to ping.
3.
Under
Network Interface
, choose from the available drop-down list options including:
ANY, CELLULAR,
ETHERNET,
and
DIAL-UP.
4.
Click
Ping
.
Reset Options
To reset the modem, go to
Administration > Debug Options > Reset Options
, click
Reset Modem.
If successful, the
system displays a message confirming a successful reset.
