DEVICE ADMINISTRATION
MultiConnect
®
rCell 100 MTR-LTE User Guide
75
6.
To set deployment-specific default settings, click
Set Current Configuration As User-Defined Default
.
a.
A dialog box appears prompting you to confirm that you want to restore to a set of user-defined
settings.
b.
Click
OK
.
7.
To save a current configuration:
a.
Click
Save
.
b.
A dialog box appears asking you if you want to open or save the configuration file. Click
Save
.
c.
Navigate to the location where you want to store the configuration. Click
Save
.
d.
A progress dialog box appears to indicate that the configuration is being saved. Click
Close
.
Using the Debugging Options
The device has utilities to help troubleshoot and solve technical problems. You can set up your device:
To automatically reboot itself at a particular time of day or use a particular offset in hours from boot.
To record and report Syslog messages that can help you resolve potential issues with your device.
You can also communicate directly with the device's cellular radio. To do this:
1.
From
Administration
, select
Debug Options
.
2.
Click the down arrow to the far right of the Radio Terminal screen to view the terminal window.
3.
Enter AT commands to the radio.
See also:
Statistics Configuration Fields
Automatically rebooting the device
To specify the amount of time that passes before the device automatically reboots itself:
1.
Go
Administration > Debug Options > Auto Reboot Timer
, select
DISABLED
,
HOUR OF DAY
, and
TIMER
from the drop-down list under
Auto Reboot
.
2.
In the
Auto Reboot Timer
field, select the
Hour of the Day
(0-23) and then enter
Hour of the Day to
Restart
(0-23).
3.
If you do NOT want the device to automatically reboot, set the time to
0
. The default setting is
0
.
Setting up Telnet
To enable and configure Telnet on your device:
1.
Go to
Administration > Debug Options > Telnet
, check
Enabled
.
2.
Enter the
Port
number for Telnet.
3.
Enter the
Username
.
4.
Enter the
Password
. Enter it again under
Confirm Password
.
5.
Click
Submit
.
6.
To save your settings, click
Save and Restart
.
