HARDWARE AND SPECIFICATIONS
MultiConnect
®
Dragonfly
TM
MTQ-MNA1-B01 Device Guide
9
Category
Description
Certifications and Compliance
EMC and Radio
Compliance
FCC Part 15 Class B
FCC Part 22
FCC Part 24
Safety Compliance
UL/cUL 60950-1 2nd Edition
Carrier
AT&T/PTCRB/Verizon
Note:
Mbed has limited USB support for the processor. Software controls routing to processor or directly
to radio.
The battery management circuit is designed for single cell Li-Ion/Li-Poly technology. Acceptability of
the battery charge circuit for charging specific batteries/cells is to be determined in the end product.
Acceptability of the battery charge circuit for charging specific batteries/cells is to be determined in
the end product.
Radio performance may be affected by temperature extremes. This is normal.
Device has been tested up to +85° C. UL Recognized @ 85° C.
40-Pin Connector Definitions
MTQ-xx-B01
Pin
Signal Name
Logic Level Voltage
1
In/Out
Description
1
DBX_TX
3V
O
ST Micro UART debug Tx output
2
SWCLK
3V
I
See ST Microcontroller Guide
3
CHARGE_MON
0 - VCC-IN
O
Open-drain charging status
indication output
4
PWR_GOOD
0 - VCC-IN
O
Open-drain power good status
indication output
5
GND
GND
GND
Ground
