GETTING STARTED
22
MultiConnect
®
Dragonfly
TM
MTQ-MNA1-B01 Device Guide
Chapter 6 – Getting Started
Installing a SIM Card on a DragonFly
Note:
When using the Dragonfly with a developer board, install the SIM card before mounting the Dragonfly on
the developer board.
To install the SIM card:
With the contact side facing down, align the notched edge as shown on the Dragonfly’s SIM holder and slide
the SIM card completely into the SIM holder.
Device Drivers
Note:
Install drivers on your computer before connecting the device.
Driver installation instructions for both Windows and Linux are included the
https://www.multitech.com/documents/publications/manuals/s000616.pdf
(S000616) available on your prod.
USB Cable Recommendations
If your device has a USB connector, to avoid enumeration or power issues:
Use a high-speed USB cable that is as short as possible.
Use a well-shielded cable with at least 24 AWG wire pair for power/ground and 28 AWG wire pair for data
lines.
If possible, use a USB port that connects directly to the motherboard rather than a USB port with added
cabling inside the computer chassis.
Use USB 3.0 ports if available. These ports are typically rated for more current.
You can order the USB cable through MultiTech. The part number is CA-USB-A-MICRO-B-3.
