Multitech MTCBA-EV1-EN3-N3 Скачать руководство пользователя страница 28

Страница: 28 / 64

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide

PPP General

PPP

Enable/disable PPP. The default is

Disable

. When enabled, the unit functions as a router. PPP

must be disabled to access the integrated cellular modem directly using telnet port 5000. If
PPP is enabled, you cannot access the integrated cellular modem.

Dial-on-Demand:

Enable/disable Dial-on-Demand. The default is

Disable

. If you disable it, the router will always

stay connected unless the Idle Time Out expires. When Dial-on-Demand

is enabled, use the

‘Wakeup on Call’ settings under the PPP menu to configure the settings for re-establishment
of the connection.

Idle Time Out:

Set the amount of idle time that will pass before the router will timeout. The default is 180
seconds. If the time expires, the PPP connection to the Internet will disconnect. Any IP
packets from the LAN side or IP traffic from the wireless side will reset this timer and prevent
the connection from dropping.

Connect Time Out:

Set the number of seconds to wait for a connection while in receive mode before timing out.

Dialing Max Retries:

Enter the number of dialing retries allowed. The default is zero, which means an infinite
number is allowed. Range 0 to 100.

Authentication

Authentication Type:

Set the authentication protocol type that will negotiate with the remote peer: pap/chap/pap-
chap. Default is pap-chap.

Username:

Enter the Username with which the remote peer will authenticate. You can leave this field
blank, if desired. Username is limited to 60 characters.

Password:

Enter the Password with which the remote peer will authenticate. You can leave this field
blank, if desired. Password is limited to 60 characters.

ICMP Keep Alive Check

Keep Alive Check:

Enable/disable Keep Alive Check. The default is

Disable

. This is used to periodically check

that the Internet connection is up. If it is not, the router will try to reconnect.

Keep Alive Type:

Select ICMP or TCP (the protocol type for Keep Alive).

Host Name:

Enter the Host Name or IP Address for Keep Alive Check. No default.

TCP Port:

Enter the TCP Port number to connect with the TCP server.

Interval:

Set the number of seconds for Keep Alive Check. Default is 60 seconds.

ICMP Count:

Set the number of ICMP Keep Alive Checks to be sent to the specified host. Default is 10.

Modem Configuration

(Refer to the Customer Activation Notices included with the product for proper information
to enter).

Dial Number:

Set the dial number to be dialed. Default is NULL.

For HSPA models, the Dial Number is

*99***1#

For EVDO models, the Dial Number is

#777

Dial Prefix:

Set the modem dial prefix. The default is ATDT.

Connect String:

Set the modem Connect String. The default is CONNECT.

APN:

Enter the APN (Access Point Name). The APN is assigned by your wireless service provider.

Init String 1-4:

Configure the modem init strings. You can set up to 4 modem initialization strings.

Baud Rate:

The Baud Rate option is only displayed on certain models and is set at 230.4K, by default.
The default setting is set for maximum performance.

Submit Button

Click the

Submit

button to save these settings.

Note:

You must click

Save and Restart

once you have completed and submitted all the screens on which you have made

changes.

Содержание MTCBA-EV1-EN3-N3

































































Результаты поиска

Содержание MTCBA-EV1-EN3-N3

Отзывы:

Похожие инструкции для MTCBA-EV1-EN3-N3

Бренды по названию

Популярные бренды

Multitech MTCBA-EV1-EN3-N3, Руководство пользователя

Результаты поиска

Содержание MTCBA-EV1-EN3-N3

Отзывы:

Похожие инструкции для MTCBA-EV1-EN3-N3

Бренды по названию

Популярные бренды