manualshive.com logo in svg

Multitech MTCBA-EV1-EN3-N3, Руководство пользователя

Поделиться
Скачать
Multitech MTCBA-EV1-EN3-N3 Скачать руководство пользователя страница 25

Chapter 3 – Using the Web Management Software 

Multi-Tech Systems, Inc. MultiModem rCell User Guide 

25 

 

General Configuration 

SNTP Client:  

Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set the local 
time. The default is 

Disable

. 

Server:  

Enter the SNTP server name or IP address to which the SNTP Client must contact in order to update the 
time. No default.

 

Polling Time: 

Enter the polling time at which the SNTP client requests the server to update the time. Default is 300 
minutes. Time must be entered in minutes.  

Time Zone Configuration 

Time Zone: 

Enter your time zone. Default = UTC (Universal Coordinated Time, Universal Time).  

 

See the following Web site for Time Zone information:   

 

 

http://wwp.greenwichmeantime.com/info/current-time.htm

 

Time Zone Offset: 

Enter +/- hh:mm. Default = +00:00. Offset is the amount of time varying from the standard time of a 

Time Zone.

 

Daylight Configuration 

Daylight Saving:

  Enables/disables Daylight Saving mode. The default is 

Enable

. 

Daylight Saving Offset: 

Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the time in + / - 

minutes. 

Daylight Saving Start Time 

Start Ordinal: 

Set the start ordinal to use during Daylight Saving mode. Options are first/second/third/fourth/last. Default 

is second. Daylight Saving time usually starts at the same time on the same day of the week in the same 
month every year. Each day of the week occurs four or five times a month. Therefore, you will be selecting 
the week in which daylight saving time starts: the first, second, third, fourth or the last of the month.  

Start Month:  

Set the start month to use during Daylight Saving mode. Default is March.

 

Start Day:   

Set the start weekday to use during Daylight Saving mode. Default is Sunday.

  

Start Time:    

Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm).

 

 

 

Содержание MTCBA-EV1-EN3-N3

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды