CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
Enter:
AT#FTPPUT="file.txt"
The device responds with:
CONNECT
7.
Send the file through the device.
Closing the FTP Data Connection
When you finish sending the file:
1.
Enter the escape sequence.
Enter:
+++
The device responds with:
NO CARRIER
2.
Close the FTP connection.
Enter:
AT#FTPCLOSE
3.
Close the PPP data connection.
Enter:
AT#SGACT=1,0
The device responds with OK.
Downloading File from FTP Server
To connect to an FTP server and download files:
1.
Check signal strength.
Enter:
AT+CSQ
2.
Activate context one
Enter:
AT#SGACT=1,1
3.
Set FTP operations timeout to 10 seconds
Enter:
AT#FTPTO=1000
4.
Configure FTP server IP address with username and password.
Enter:
AT#FTPOPEN="###.##.###.#","username","password",0 where ###.##.###.# is the IP address and the
username and password for the FTP server.
5.
Configure file transfer type.
Enter:
AT#FTPTYPE=# where # is 0 for binary or 1 for ASCII.
6.
If required, change the working directory to "folder1".
Enter:
28
MultiConnect
®
Cell User Guide
Содержание MTC-C2
Страница 1: ...MultiConnect Cell User Guide...
Страница 10: ...PRODUCT OVERVIEW Dimensions 10 MultiConnect Cell User Guide...
Страница 11: ...PRODUCT OVERVIEW MultiConnect Cell User Guide 11...
