manualshive.com logo in svg

Multitech MTASR3-200, Руководство пользователя

Поделиться
Скачать
Multitech MTASR3-200 Скачать руководство пользователя страница 12

RASFinder User Guide

MTASR3-200

12

Front Panel

The front panel contains three groups of LEDs that provide the status of the LAN connection, link
activity, and general status of the RASFinder. The EtherNet LAN LEDs display the activity of the LAN
in whether the RASFinder is connected to the LAN, transmitting or receiving packets, and if a
collision is in progress. The Link LEDs display the status of the three links that can be connected to
the RASFinder with whether a link is ready to transmit or receive serial data. The last group of LEDs
indicates whether the self test passed or failed and if the power ON/OFF switch on the back of the
RASFinder is set to ON.

Figure 1-2. Front Panel

ETHERNET

RD

Receive Data indicator blinks when packets are being received from the local area network.

TD

Transmit Data indicator blinks when packets are being transmitted to the local area network.

CL

Collision indicator lights when a collision is in progress; that is, when two nodes are
transmitting packets at the same time.

LK

Link indicator lights indicating that the RASFinder is connected to the local area network.

LINK x

RD

Receive Data indicator blinks when the link is receiving data.

TD

Transmit Data indicator blinks when the link is transmitting data.

CD

Carrier Detect indicator lights when the link detects a carrier signal.

TR

Terminal Ready indicator blinks when the link is ready to transfer data.

Fail

Fail indicator lights when a self test fails to complete as expected.

Power The power indicator lights when the On/Off Switch is in the ON position.

Содержание MTASR3-200



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды