Multitech MT9234ZBA-USB, Руководство пользователя

Страница: 48 / 50

Appendix B – Installing with Linux
48
Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide
Installing the Firmware Images
Copy ti_mts_fw_cdma, ti_mts_fw_edge, ti_mts_fw_gsm, ti_mts_fw_MULTIMODEM PRODUCT and
ti_mts_fw_mt9234zbausb to /usr/lib/hotplug/firmware/ or /lib/firmware depending on your distribution.
Be sure the files are owned by root:root and have permissions r--r--r--.
Loading the TI USB 3410/5052 Driver
The ti_usb_3410_5052 driver should be automatically loaded when you plug in the TI USB 3410/5052 devices,
provided your device uses the default vendor and product ids. If it does not, see the section of the Release Notes
file "VENDOR and PRODUCT IDS".
The first TI USB 3410/5052 device plugged in appears as /dev/ttyUSB0, then next as /dev/ttyUSB1, and so on.
These device names are shared with other USB serial devices.
If TI USB devices had been in use before installing the new TI USB driver, old versions of the drivers can still be
loaded. You must unload these old versions before the newly installed driver is used.
The simplest way to unload the old drivers and load the new is to reboot.
Alternatively, you can close all open TI USB serial ports, disconnect the TI USB serial devices, and then unload the
old TI USB serial driver with the command
rmmod ti_usb_3410_5052
Then reconnect the TI USB serial devices and the new driver is loaded.
Uninstalling the TI USB Driver (for 2.6 kernel versions)
If you installed the TI USB RPM package, you can uninstall it by logging in as root and running the command
rpm -e ti_usb_2.6-X.Y-Z
If you installed the TI USB TGZ package, you can uninstall it by logging in as root and running the following
commands:
Command Explanation
cd ti_usb_2.6-X.Y Provide a full or relative path to the unpacked
source file directory.
make uninstall