Multitech MT9234ZBA-USB Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 50

background image

39

Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide

Appendix B – Installing with Linux

Your Multi-Tech modem supports Linux 2.4 kernel versions (2.4.28 and above), 2.6 kernel versions 2.6.8 through
2.6.10, and, with a special patch, Linux kernel versions 2.6.11 through 2.6.20.4. There are three separate
installation procedures for these ranges of kernel versions. When installation is complete, you must use AT
commands to configure the modem for the country in which it is operating.

Installing the Modem on Computers Running the Linux 2.4
Kernel

Installation Overview

This procedure applies to Linux 2.4 kernel versions 2.4.28 and above.

These tgz and source RPM packages (ti_usb-1.2.tgz and ti_usb-1.2-1.src.rpm) contain a device driver for your
Multi-Tech modem’s TI USB 3410 processor in the Linux 2.4 kernels.

This package is designed for these hardware platforms: a standard PC with i486, Pentium, or compatible CPUs (32
bit x86).

This package has been tested on these Linux distributions:

●

Red Hat 8.0

●

Red Hat 9.0

●

SUSE Linux Standard Server 8.0

Most likely this package works on many other Linux distributions based on the 2.4 kernels, but this has not yet
been tested. Note that different distributions can make custom changes to the Linux kernel, and there is a small
chance that these changes might be incompatible with this package.

This package does not work in the Linux 2.6 kernels. Separate packages of the TI USB 3410/5052 driver are
available for the Linux 2.6 kernels.

These packages are available from http://www.brimson.com/downloads

The tgz package is named ti_usb-X.Y.tgz, and the source RPM package is named ti_usb-X.Y-Z.src.rpm, where X.Y-Z
is the version number. See www.brimson.com/downloads/README for a description of the packages available.

If you have questions or problems with this package please contact Texas Instruments technical support or
Brimson technical support.

«
...
37
38
39
40
41
...
»

Содержание MT9234ZBA-USB



















































Отзывы:

Нет отзывов

Похожие инструкции для MT9234ZBA-USB

U.S. Robotics 56K Voice

Бренд: 3Com Страницы: 210

3C892 - OfficeConnect ISDN Lan Modem Router

Бренд: 3Com Страницы: 14

U.S. Robotics 56K Voice

Бренд: 3Com Страницы: 168

Бренд: US Robotics Страницы: 2

Бренд: USR IOT Страницы: 52

Бренд: FALCOM Страницы: 31

Бренд: Radyne Страницы: 306

Бренд: Kathrein Страницы: 16

Бренд: Deco Страницы: 2

Бренд: DECODE Страницы: 20

Бренд: Conceptronic Страницы: 105

Бренд: Ebyte Страницы: 11

Бренд: Ebyte Страницы: 20

Бренд: Ebyte Страницы: 18

Бренд: Ebyte Страницы: 25

Бренд: Datatronics Страницы: 22

HPT104BT Series

Бренд: Javad Страницы: 44

Бренд: Javad Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды