manualshive.com logo in svg

Multitech MT2834DXK, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT2834DXK Скачать руководство пользователя страница 98

Quick Reference Guide

90

Service

If you are outside the USA, your local distributor of Multi-Tech products
normally offers the quickest and most economical repair option. If nec-
essary, you may send your modem to our Mounds View factory in the
USA. A modem that is shipped to us from outside the USA must have a
Returned Materials Authorization (RMA) and shipping instructions. To
return a modem for repair from inside the USA, no RMA is required;
simply send it to us freight prepaid. Include a description of the prob-
lem, a return shipping address, and a check or purchase order for out-
of-warranty repairs.

Please send modems that require repairs to the following address:

Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112

Attn: Repair

If you are shipping from outside the USA, please contact our Repair
Department for an RMA prior to your shipment. You can contact us by
telephone at +(612) 785-3500 or by fax at +(612) 785-9874.

Technical Support

Multi-Tech Systems has an excellent staff of technical support person-
nel available to help you get the most out of your Multi-Tech product. If
you have any questions about the operation of this unit, please call
(800) 972-2439 (USA and Canada) or (612) 785-3500 (international and
local). Please have modem information available. You can also contact
Technical Support through the following URL:

http://www.multitech.com/_forms/email_tech_support.htm

Содержание MT2834DXK









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды