manualshive.com logo in svg

Multitech MT2834DXK, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT2834DXK Скачать руководство пользователя страница 3

v

Quick Reference Guide
Models MT2834ZDX, MT2834ZDXb, MT2834ZDXI, MT2834DXK
P/N 82034908 Revision I (3/5/99)

Copyright ©1999 by Multi-Tech Systems, Inc.

All rights reserved. This publication may not be reproduced, in whole or in part, without
prior expressed written permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the
right to revise this publication and to make changes in the content hereof without obli-
gation of Multi-Tech Systems, Inc. to notify any person or organization of such revi-
sions or changes.

Record of Revisions

Revision

Date

Description

I

3/5/99

Updated agency, technical support, BBS, and Internet sections;
added URLs; deleted CompuServe section.

Trademarks

MultiModem, MultiModemZDX, Multi-Tech, and the Multi-Tech logo are trade-
marks of Multi-Tech Systems, Inc.

Adobe, Acrobat, and Acrobat Reader are trademarks of Adobe Systems Incorporated.
IBM is a trademark of International Business Machines Corporation. Macintosh is
a registered trademark of Apple Computer, Inc. MNP and Microcom Network
Protocol are trademarks of Microcom, Inc. Microsoft, Windows, Windows 95, and
Windows NT are either registered trademarks or trademarks of Microsoft Corpora-
tion in the United States and/or other countries. ProComm Plus is a registered
trademark of Datastorm Technologies, Inc.

Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112 U.S.A

(612) 785-3500 or (800) 328-9717
Fax  (612) 785-9874
Fax-Back Service  (612) 717-5888
Technical Support  (800) 972-2439
BBS  (612) 785-3702 or (800) 392-2432
Internet  

http://www.multitech.com/

Содержание MT2834DXK









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды