Multitech MT-SMI-DK, Руководство по разработке

Страница: 36 / 68

CHAPTER 6 – LABELING REQUIREMENTS
Universal Socket Developer Guide 36
Example CDMA C1 SocketModem Label
Notes:
The label is shown larger than actual size.
Actual labels will vary depending on the regulatory approval markings and content.
Multi-Tech Model Identification
Multi-Tech Ordering Part Number
MEID
(On EV2 Devices, the ESN is here.)
Analog Labeling Requirements
United States Labeling Requirements (for Dial-Up Modems)
Telecom requirements apply to analog products only.
Approved terminal equipment (TE) and approved protective circuitry shall prominently display the following
information using the format shown below:

Responsible party or manufacturer

Product Identification

Equipment Code

Ringer Equivalence

Ringer Type

Indication that the product meets the requirements of FCC Part 68
The information required by the first five items shall correspond to the records in the ACTA database of approved
equipment. The required information shall be encoded in the following format:
US: AAAEQ##TXXX
Where:

US: Is a fixed field that indicates the equipment meets all requirements of 47 CFR Part 68, including the
requirements published by ACTA.

AAA is the responsible party’s Grantee Code obtained previously from the FCC’s Common Carrier Bureau or
currently from ACTA.

EQ Is an equipment code indicating to the Service Provider any special signal handling or billing
requirements. The equipment codes are listed in Annex A (normative).