background image

 

 

 

GPS1200 GFU19 MultiTech CDMA Modem Quick Guide

 

July, 2005 

 Page 3/18

 

 

GFU19 Multi-Tech CDMA Modem 

Introduction 

  

About this 
Quick Guide 

This Quick Guide is designed to provide a step by step guide to configuring the 
GPS1200 sensor and Multi-Tech CDMA for connection to a network using a Verizon 
Wireless

 Internet data plan. 

 
This Quick Guide assumes that the user is familiar with general GPS surveying 
procedures and real time applications.   
 

Note:

  Please setup an Internet Data plan from 

Verizon Wireless

 and have it 

activated before using this manual.  

Also, be sure to obtain your MIN and MDM 

number

.  If the two numbers are different, please refer to 

Appendix 1 

for activation. 

   

Firmware 
Version 2.00 

This Quick Guide has been designed for GPS System 1200 – Firmware Version 2.00 
or higher.  If using a different firmware version, you may notice slight differences in 
the menu commands. 

 

User Manuals 

A number of user manuals are available on the GPS System 1200 Software CD.  
These manuals are provided in Adobe Acrobat format and include Adobe Acrobat 
Reader.  They contain a wealth of information about the GPS1200 System, including 
system specifications and operation procedures for real time as well as post-
processed static, rapid static and kinematic surveys. 
 
More detailed information relative to real time surveying is also available in the 
following Leica manuals: 
 

GPS Equipment User Manual

 – provides a general system overview and contains 

information on technical specifications and care and usage of the equipment. 
 

Getting Started with Real Time Surveys

 – contains instructions on equipment 

setup and procedures specific to real time surveying. 
 

Technical Reference Manual

 

– this comprehensive manual provides detailed 

information on nearly all aspects of the GPS System 1200, including many of the 
procedures mentioned in this quick guide. 

 
 
 
 
 
 
 
 
 
 
 

Содержание GFU19



















Отзывы: