Multitech Dragonfly Nano MTQN-MNG3-B02 Скачать руководство пользователя страница 16

SAFETY INFORMATION

16

Dragonfly

Nano MTQN-MNG3-B02 Device Guide

General Safety

The device is designed for and intended to be used in fixed and mobile applications. Fixed means the device is
physically secured at one location and cannot be easily moved to another location. Mobile means the device is
used in other than fixed locations.

CAUTION:

Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s antenna and the

body of the user or nearby persons. The device is not designed for or intended to be used in portable applications
within 20 cm (8 inches) of the user’s body.

Attention:

Maintenir une distance d'au moins 20 cm (8 po) entre l'antenne du récepteur et le corps de l'utilisateur

ou à proximité de personnes. Le modem n'est pas conçu pour, ou destinés à être utilisés dans les applications
portables, moins de 20 cm du corps de l'utilisateur.

Interference with Pacemakers and Other Medical Devices

Potential Interference

Radio frequency energy (RF) from cellular devices can interact with some electronic devices. This is
electromagnetic interference (EMI). The FDA helped develop a detailed test method to measure EMI of implanted
cardiac pacemakers and defibrillators from cellular devices. This test method is part of the Association for the
Advancement of Medical Instrumentation (AAMI) standard. This standard allows manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from cellular device EMI.

The FDA continues to monitor cellular devices for interactions with other medical devices. If harmful interference
occurs, the FDA will assess the interference and work to resolve the problem.

Precautions for pacemaker wearers

If EMI occurs, it could affect a pacemaker in one of three ways:

Stop the pacemaker from delivering the stimulating pulses that regulate the heart's rhythm.

Cause the pacemaker to deliver the pulses irregularly.

Cause the pacemaker to ignore the heart's own rhythm and deliver pulses at a fixed rate.

Based on current research, cellular devices do not pose a significant health problem for most pacemaker wearers.
However, people with pacemakers may want to take simple precautions to be sure that their device doesn't cause
a problem.

Keep the device on the opposite side of the body from the pacemaker to add extra distance between the
pacemaker and the device.

Avoid placing a turned-on device next to the pacemaker (for example, don’t carry the device in a shirt or
jacket pocket directly over the pacemaker).

Vehicle Safety

When using your device in a vehicle:

Do not use this device while driving.

Respect national regulations on the use of cellular devices in vehicles.

If incorrectly installed in a vehicle, operating the wireless device could interfere with the vehicle’s
electronics. To avoid such problems, use qualified personnel to install the device. The installer should verify
the vehicle electronics are protected from interference.

Using an alert device to operate a vehicle’s lights or horn is not permitted on public roads.

Содержание Dragonfly Nano MTQN-MNG3-B02






































Отзывы: